Special Safety Instructions For This Device; Cleaning And Care - BOMANN HT 897 CB Mode D'emploi

• Attention: The nozzles become hot during operation.
• If the hair dryer is used in the bathroom, remove the mains plug after use as water
represents a hazard. This also applies when the hair dryer is switched off.
• Do not put objects, hair or your hands in front of the air intake opening! The device can
suffer damage despite the overheating protection if the airfl ow is blocked!
• As additional protection we recommend the installation of a fault current protection
device (RCD) with a rated current of not more than 30 mA in the wiring system of the
bathroom. Please contact an authorised electrician for advice.
1. Fully unwind the mains cable.
2. Make sure that the iron voltage (see name plate) and the mains voltage match.
3. Insert the plug into a duly installed 230 V/50 Hz protective contact socket.
4. Shift the switch on the handle to one of the desired heat/blowing levels:
Switch-off
• After use shift the switch to position „0" and pull out the plug. Leave the device to cool
before putting it away!
• To this purpose you can place the device on one of the rubberised sides of the housing
• Store the device in the see-through bag.
• Before cleaning remove the mains lead from the socket.
• Clean the housing with a soft, dry cloth without additives.
• The device must never be immersed in water!
05-HT 897 CB.indd 31 05-HT 897 CB.indd 31

Special safety instructions for this device

Warning of electric shock! This device must not
be used in the vicinity of baths, wash basins or other
vessels containing water.
Commissioning
Level 0: off
Level 1: medium airfl ow and medium temperature
Level 2: strong airfl ow and high temperature

Cleaning and care

GB
31
13.12.2007 14:21:44 Uhr 13.12.2007 14:21:44 Uhr