Using Your Ceiling Fan - Luminance Brands Kathy ireland Home Pro CF700BS09 Mode D'emploi

7.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box or Circuit
Breaker Panel .
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward .
During the Winter Months, run the Fan Clockwise, as
you look up at it, to direct airflow upward .
If airflow is desired in the opposite direction, turn the
Ceiling Fan OFF and wait for the Blades to stop turning .
Slide the Reverse Switch (located on the side of the
Switch Housing Assembly) to the opposite position, and
turn the Ceiling Fan on again (Figure 22) .
The Fan Blades will turn in the opposite direction and
reverse the airflow .
Reverse Switch Information
Season Blade Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
7.2
Cut the 3-Speed Switch Pull Chain to a desired length
(optional) . Connect the Wood Pendant (supplied)
to the 3-Speed Switch Pull Chain by sliding the
Wooden Pendant (small hole first) onto the Pull Chain
(Figure 23) . Attach the Chain Coupler to the end of the
Chain and allow the Wooden Pendant to fall down over
the Coupler .
Your Fan model is equipped with a 4-position,
3-speed Pull Chain Switch (Figure 23) . The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF

7. Using Your Ceiling Fan

REVERSING
SWITCH
Figure 22
!
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control device.
Figure 23
16
SWITCH
HOUSING
ASSEMBLY
WARNING
U.L. Model No.: 52-ANT