Fantec MM-HDRTV Manuel D'utilisation page 160

Firmware installation will start in about 30 seconds. The LED indicators on the front panel will
be enlightened and flashing during installation. If it is connected to a TV set, a blue install page
will appear on the TV screen.
Please wait for about 3 minutes, the installation will be completed, the LED indicators will go off,
and the player will be powered off automatically. Then you can press the POWER / STANDBY
button to turn on the player and enjoy.
Note:
Do not turn off the power during installation;
The USB Pen Drive is not allowed to be unplugged during installation.
EN 160 / 259