Changing Network Settings - Fantec MM-HDRTV Manuel D'utilisation

Record Device

7.6 Changing Network Settings

Press the LEFT / RIGHT button on the remote control to select the Network tab from the menu
bar.
Wired LAN Setup
Press the UP / DOWN button to select from On and Off. Press the
ENTER button to confirm. If On, the time shift will start automatically
while in Video In mode.
Select to set device to restore the recorded files.
Press the UP / DOWN button to select from HDD and USB. Press the
ENTER button to confirm.
Select to set the Ethernet settings.
Before using the network functions, please check following items:
5) Connect the player to network first;
6) Please enable NetBIOS of TCP/IP on computer;
7) Please turn off your PC's firewall;
EN 131 / 259