7) Get SSID Name
Select Auto to search for an existing SSID (Service Set Identifier).
Select the access point you wish to access from the SSID list.
Note: In the Security list, WEP (Wired Equivalent Privacy) and WPA
(Wi-Fi Protected Access) means the network is encrypted, i.e. an
encryption key is needed to access the network. NONE means it is
an open system network.
8) Confirm SSID Name
9) WLAN Security Setting
Select Open System if the network is not encrypted. Otherwise,
select Shared Key (WEP) or WPA Key to enter the encryption key.
EN 134 / 259