Operator Responsibility; Safety Instructions - Honda Power Products F720 Manuel De L'utilisateur

To ensure safe operation
For your safety and the safety of others, pay special attention to these
precautions:

Operator responsibility

Keep the tiller in good operating condition. Operating a tiller in poor
or questionable condition could result in serious injury.
Be sure all safety devices are in working order and warning labels
are in place. These items are installed for your safety.
Be sure the safety covers (fan cover, recoil starter cover) are in place.
Know how to stop the engine and tines quickly in case of
emergency. Understand the use of all controls.
Keep a firm hold on the handlebars. They may tend to lift during
clutch engagement.
1.
−
Honda tiller is designed to give safe and dependable
service if operated according to instructions.
Read and understand the Owner's Manual before operat-
ing the tiller. Failure to do so could result in personal injury
or equipment damage.
Exhaust gas contains poisonous carbon monoxide.
Never run the tiller in an enclosed area.
Be sure to provide adequate ventilation.
When installed in ventilated protection are to be observed.
The rotating tines are sharp and they turn at high speed.
Accidental contact can cause serious injury.
Keep your hands and feet away from the tines while
engine is running.
Stop the engine and disengage the tines clutch before
inspection or maintenance of tines.
Disconnect the spark plug cap to prevent any possibility
of accidental starting. Wear heavy gloves to protect your
hands from the tines when cleaning the tines or when
inspecting or replacing the tines.

SAFETY INSTRUCTIONS

3