Honda Power Products F720 Manuel De L'utilisateur page 33

1. Engine oil change
Change the oil when the engine is warm to assure rapid and complete
draining.
1. Remove the oil filler cap and the drain plug to drain.
2. Tilt the tiller back to drain the crankcase completely.
3. Reinstall the drain plug, refill with the recommended oil (p. 12 ), and
reinstall the oil filler cap.
Oil capacity: 0.6 (0.6 US qt , 0.5 Imp qt)
DRAIN PLUG
Wash your hands with soap and water after handling used oil.
2. Transmission oil change
1. Place the tiller on a level surface.
2. Remove the oil filler cap and drain plug to drain.
3. Install the drain plug. Fill the transmission with same oil as the
engine oil (see page
Oil capacity: 3.5 (3.7 US qt , 3.1 Imp qt)
DRAIN PLUG
32
OIL FILLER CAP
12 ) up to the level. Install the oil filler cap.
LEVEL
OIL FILLER CAP