Honda Power Products F720 Manuel De L'utilisateur page 24

2. Handlebar height adjustment
The handle position should be adjusted to suit the stature of the
operator and work condition.
Before adjusting the handlebar, place the tiller on the firm level
ground to prevent the handle from collapsing accidentally.
To adjust the handlebar height, loosen the adjuster, select the
appropriate position and tighten the adjuster.
3. Main clutch operation
The clutch engages and disengages the power from the engine to the
transmission.
When the clutch lever is squeezed, the clutch is engaged and power is
transmitted. Squeeze the lever. The tool will be rotated.
When the lever is released, the clutch is disengaged and power is not
transmitted. Release the clutch lever. The tool will be stopped.
Reduce engine rpm before operating main clutch operation.
Disengaged
Engaged
Disengaged
Engaged
LOOSEN
TIGHTEN
ADJUSTER
MAIN CLUTCH LEVERS
DISENGAGED ENGAGED
23