Traffic Mode (Loop Recording) - SilverCrest SCAW 5.00 B2 Manuel D'utilisation Et Informations Sur Les Services

Traffic mode (loop recording)

Use this function to enable or disable loop recording (Traffic mode).

Use the right or left navigation button (6) to select the

Press the centre navigation button (6) to confirm your selection.
The following settings are available:

Use the right or left navigation button (6) to select the setting you want.

Press the centre navigation button (6) to confirm your selection.
A new file is automatically created after 10 minutes.
Data is overwritten automatically as soon as the memory card or the
internal memory is full. The oldest data is overwritten first. If you do not wish
to delete or overwrite any recorded data, please make a backup copy or
swap the memory card.
Please connect an external USB power adapter (not supplied) when
enabling this function if you intend to record over an extended period. To
do this, you will need the USB/AV cable supplied.
Disables loop recording.
Enables loop recording.
Enables loop recording and rotates the view by 180°.
SilverCrest SCAW 5.00 B2
icon.
English - 239