Controlling The Outputs; Step 1 - Select An Output; Step 2 - Set The Output Voltage And Current - Keysight Technologies E36300 Série Guide D'utilisation

Controlling the Outputs

Step 1 - Select an output

Press one of the output selection keys to select an output to control. The lit key identifies the selected output. All
subsequent output-specific front panel commands are sent to the selected output.

Step 2 - Set the output voltage and current

Turn the Voltage and Current knobs. The output voltage or current setting changes when they are turned.
You can also enter the voltage and current values directly in the numeric entry fields (the Set fields) in the meter-view
display. Use the navigation keys to select the field; use the numeric entry keys to enter the value. The value becomes
active when you press [Enter] .
Lastly, you can press the Source Settings key to access the Source Settings window. Use the navigation keys to
highlight the Voltage or Current fields. Then enter the voltage and current values with the numeric keys. You can use
the Voltage and Current knobs to adjust the values in the Voltage and Current fields.
Press [Enter] to enter the value. Press Back to return to the meter-view display.
Keysight E36300 Series User's Guide 57