Options And Fuse Information; Ensure The Correct Ac Input Voltage And Fuse Settings - Keysight Technologies E36300 Série Guide D'utilisation

Options and Fuse Information

Ensure you order the proper instrument option for the mains power that will be used for the instrument.
Options 0EM, 0E3, and 0E9 determine which power-line voltage is selected at the factory.
Option Description
0EM 115 VAC ± 10%, 50/60 Hz input voltage
0E3 230 VAC ± 10%, 50/60 Hz input voltage
0E9 100 VAC ± 10%, 50/60 Hz input voltage

Ensure the correct AC input voltage and fuse settings

Use the proper switch settings
To change the input AC voltage selector on the power supply, use the two AC selector switches on the underside of
the power supply as shown.
For example, to select 230 V, slide the left switch to the left and the right switch to the right, as illustrated in the
diagram below the switches.
To select 115 V, slide both switches to the left, and to select 100 V, slide the two switches towards each other.
Keysight E36300 Series User's Guide 23