4/ Use; Presentation Of The Device; Start Up - Dexton C-11-213031 Mode D'emploi

4/ USE

4.1 - Presentation of the device

Low pH safety LED
pH display LEDs
Peristatic pump
4.2 – Start up
CHECK THE WATER PARAMETERS
1
When installing the device for the first time or at the start of a new season, it is imperative to check and
correct the following points :
State of the water The pool water must be clear, free from algae or deposits
The water should be correctly balanced (Alkalimetry, Hydrometry) :
- Alkalimetry shows the level of bicarbonates dissolved in the water.
TAC / TH
- Hydrometry, shows the water hardness, that is the level of calcium or magnesium
salts dissolved in the water.
Stabilised between 7.0 et 7.4
pH
Important: Whichever chemical treatment being used, the efficiency of the chlorine decreases very
quickly with the increase of the pH. The tartar also settles faster as soon as pH is high or unstable.
15
High pH safety LED
pH setup button
pH probe calibration
button