2/ Packing List; 3/ Installation - Dexton C-11-213031 Mode D'emploi

Masquer les pouces Voir aussi pour C-11-213031:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2/ PACKING LIST

1 pH controller
1 pH probe
1 Kit including:
5 m semi-rigid tubing
-
1 suction strainer
-
1 Ø ½ '' injection connector
-
1 probe holder ½''
-
1 kit of clamping screws & plastic inserts
-
2 pipe collars diam 50 mm x ½''
-

3/ INSTALLATION

Before proceeding with the installation of the device, it is very important to check the following
points:
The technical area should be dry and properly ventilated, protected from rain, splashes, discharges
of water and UV radiation. Provide a space for the tank with the pH corrector which is a sufficient
distance from the electrical appliances or any other chemical containing product.
Non-compliance with this instruction will lead to abnormal oxidation of the metallic parts, which
may result in the device break down.
Assembly of the pH controller and its attachments must strictly conform to the following installation
diagram :
13

Publicité

Table des Matières
loading

Table des Matières