•
Gradually increase the speed, reduce the speed if:
- The stirring bar comes off due to a too high speed
- The instrument is not running smoothly or the container moves on the base plate
•
Process pathogenic materials only in closed vessels.
•
Be aware of hazards due to:
-
Overfilling of media
-
Unsafe container
•
If the stirring bar contains PTFE, please note:
- Elemental fluorine, trifluoride ion, and alkali metals will corrode PTFE. Halogen hydrocarbons expand PTFE
at room temperature.
- Molten alkali, alkaline earth metals or their solution, as well as elements on second and third column of the
Periodic Table of elements will react with PTFE when temperature reaches 300 ~400 ºC
•
The instrument can only be disconnected from the main power supply by pulling out from the mains plug, not the
cable.
•
The voltage stated on the label must correspond to the main power supply.
•
Do not cover the device.
•
The instrument may only be opened by experts.
•
Keep away from high magnetic fields.
•
Observe the minimum distances between the devices, between the device and the wall and above the assembly
(min. 100 mm)
2. Proper Use
The instrument is designed for mixing liquids in schools, laboratories or factories.
This device is not suitable for use in residential areas or other constraints mentioned in Chapter 1.
>100mm
>100mm
Figure 1
3