Help With Problems - Honeywell HR 40 Instructions De Montage Et D'utilisation

Help with problems

Problem/Display
The radiator will not
become cold
Auto
Auto
to
Manu
Manu
to
flashes
Cause
The valve is not closing fully
Display during automatic
adaption
Display during manual
adaption
The batteries are too flat
The batteries are empty (no
valve movement is possible)
No adaption is possible
The control unit is not inserted
The motor cannot be moved
or
the valve stroke is too short
The unit is defective
Remedy
Check the fitting and if
necessary carry out manual
adaption
Automatic adaption takes
3 minutes at most
–
Change the batteries as soon
as possible
Change the batteries
immediately
Check the fitting and if
necessary carry out manual
adaption
Insert the control unit correctly
Check the fitting, and if
necessary remove dirt and
carry out manual adaption
Please contact your local dealer
33