Archos 35 Mode D'emploi page 15

CONNECTING TO A WIFI NETWORK
www
For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time
the ARCHOS is in range of a network that you have already configured once, it will attempt to make a
connection.
1. To configure a new WiFi network, go on the Home screen, tap on the Menu
icon , then select Settings
2. In the Settings screen, select Wireless & networks.
3. If the WiFi is off, tap on the WiFi line to turn it on.
4. Select WiFi settings. The ARCHOS will scan for available WiFi networks and
display them in the WiFi network section.
5. Tap the network you want to connect to.
6. Tap inside the Wireless password field to make the virtual keyboard appear.
We recommend that you select Show password, to be able to see the charac-
ters you are typing.
7. Enter the required network information* and tap Done.
8. Tap Connect.
Your ARCHOS will now attempt to establish a connection to that WiFi access
point with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will
need a key (a series of numbers and/or letters) of the type WEP, WPA, or WPA2. Check with the Internet sevice
provider to obtain the exact connection parameters required.
.
15