Archos 35 Mode D'emploi page 5

STARTING UP
Connecting
Follow exactly the procedure. You must plug in the ARCHOS DECT base before turning on the ARCHOS handset.
1. Connect the DECT base AC adapter to the ARCHOS DECT base and plug it into a wall outlet.
2. Connect the telephone cable to the ARCHOS DECT base and to your telephone outlet.
3. Connect the supplied USB cable to the USB AC adapter and to the docking station.
4. Plug the USB AC adapter into a wall outlet.
5. Place the ARCHOS handset on the docking station.
Charging
When the ARCHOS handset is placed on the docking station, the device starts charging.
Notes:
If the device is turned off, the charging indicator is off during the charging process.
To see the charging process, turn on the device.
On the upper right corner, a battery icon is displayed with a filling action.When the device is on and fully charged,
the charging indicator starts blinking.
Touchscreen actions
To scroll up/ to scroll down: place your fingertip on the screen and move it quickly up/move it quickly down
Touch to activate an item: touch with your fingertip.
Touch and hold for an alternate action: to touch and hold an item, touch the item and do not lift your fingertip until
the action occurs.
Drag an item to change its position: to drag an item, touch and hold it for a moment, then without lifting your
fingertip, move your fingertip on the screen until the item reaches its destination.
Swipe left/right to change the view: to swipe, touch the screen and then quickly move your fingertips across the
screen without lifting your fingertip. Do not pause on the screen with your fingertips at the initial point of contact or
you may drag an item.
Double-tap: quickly tap the screen twice on a webpage or other application screen to zoom.
5