Optional Accessories; Use The Remote Control With Miscea Classic Systems; Cleaning And Maintenance - Miscea CLASSIC Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.
Use
5.5

Optional accessories

Remote control
With the remote control, you can change the default settings of the system. The settings include,
but are not limited to the following: temperature, dosage, spool cycle, light pulse and resetting.
For further information, please visit our website for the miscea representative in your country.
5.6

Use the remote control with miscea CLASSIC systems

The remote control signal is detected through the display screen in the faucet head. Position the
remote control as shown in Fig. F and G below to operate. Then the desired settings can be
changed.
For instructions on how to change specific settings using the remote control, please refer to the
miscea Remote Control instruction manual.
Fig. F
6.

Cleaning and maintenance

!
CAUTION
● Do not try to repair the faucet, the water box or the soap box yourself. Only qualified miscea
personnel are qualified to make repairs. If you make repairs yourself, the warranty becomes void.
● Do not clean the faucet with abrasives, strong acids or bleach products. If you do, the
warranty becomes void.
WARNING
!
Do not clean the system when it is switched on.
.
30 º
Fig. G
21
V 16.01 EN

Publicité

Table des Matières
loading

Table des Matières