Main Features / Preparatory Work; Preparatory Work; Operation - Storch Steam Master Mode D'emploi

Main features
The STORCH wallpaper stripper is a professional, fast-working steam wallpaper stripper.
It has many additional features:
− Each tank is individually pressure tested.
− Storage reels for the hose and power cable.
−
Neon On/Off switch.
− Patented platform which allows the user to reach the upper part of the wall.
− Cool running steam hose.
− Securely closing tank Pressure Cap.

Preparatory work

To achieve the fastest result, it is best to perforate or carefully carve notches in the wallpaper.
This measure is necessary if you have heavily embossed or coated wallpaper.
Use a perforating tool to perforate the wallpaper or, alternatively, use the edge of a spatula to carve crosses in the
wallpaper approx. 15 cm apart.
A special scraper tool can also be used. As is the case for all
renovation work, you should take the necessary precautions
to protect carpets and furniture. Cover these items or clear
them away completely.
If the plaster on your wall is damaged it is possible that the
steam will cause blisters, thereby requiring the plaster to be
replaced. Therefore, please check the quality of the plaster
before starting work.

Operation

DANGER CAUSED BY STEAM !
The wallpaper stripper has been designed to remove wallpaper quickly and easily, however, you need to be
continuously aware that hot steam is produced.
Position the machine on a flat, even surface close to the area where you want to remove the wallpaper. Remove the
steamplate from its mount on the frame. Unwind the hose and the power cable completely. Screw the union nut of the
steam hose onto the thread of the steamplate.
To fill the machine, unscrew the cap from the filler neck
and slowly add water up to the maximum point of the water
level indicator (red ball float). Only fill with clean water.
Using hot water will reduce the pre-heating period.
Do not use any additives.
Do not overfill with water!
Screw the Pressure Cap (51) onto the filler neck and tighten
it by hand. Do not over-tighten or cross-thread!
Original instruction
Tighten firmly by hand only,
do not over-tighten or cross-thread.
36