Warranty Disclaimer; Montage - Hama 00178253 Mode D'emploi

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to
specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• Universal Smartphone Bike Holder Bag
• These operating instructions
3. Safety Notes
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and only use it in a
dry environment.
• When using this product, observe the applicable local traffic laws and
regulations.
• Do not drop the product and do not expose it to any major shocks.
• Keep the packaging material out of the reach of children due to the risk of
suffocation.
• Dispose of packaging material immediately according to locally applicable
regulations.
• Do not modify the product in any way. Doing so voids the warranty.

4. Montage

Warning – Risk of injury
• Do not allow yourself to be distracted by the product, for example when
driving a vehicle or operating sports equipment. Always pay attention to
the surrounding traffic and your environment.
• The product is not intended for mounting on carbon parts (for example,
handlebars). Carbon parts can be damaged by the clamp, break and cause
serious accidents and injuries!
Note
• Never apply force when using the product or during installation.
• The attachment of a smartphone is at the user's own risk.
2
4.1 Mounting
• Thread the clamp onto the ratchet strap as illustrated (A).
• Loop the ratchet strap around the handlebars and through the ratchet head.
• To protect the handlebars, place the supplied rubber pad between the
handlebars and ratchet strap, and loosely tighten the ratchet strap (B).
• Use the small lever for final fastening (C). Each movement tightens the ratchet
strap up a notch.
4.2 Attaching the smartphone case
• Insert the smartphone case as illustrated (D). The smartphone case is securely
fastened when it audibly clicks into place in the clamp.
Note
Keep checking that the smartphone holder is securely seated.
• To remove the smartphone holder, press the release buttons and take it off.

5. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
6. Service and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com