Initial Start-Up - Fujitsu LIFEBOOK AH531 Guide Pratique

Initial Start Up
opening the
Display Panel
AC Adapter
Wall Jack
Power/Suspend/
Resume button
DC In
AC Cable
LAN Port
1. open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. turn on Power
• Press the Power/Suspend/Resume button.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once successfully
completed, the operating system will begin the initialization
process.
4. Starting Windows
When configuring Windows
the WLAN. Otherwise, there may be issues when
activating Click Me!.
Caution
• Accept the Microsoft
®
Fujitsu End User License Agreement to proceed. Select your User
ID (optional) and Password during the "Welcome Screen." Keep
a record of your User ID and password stored in a secure place.
THE SCREEN WILL GO DARK FOR SEVERAL MINUTES. Do not
attempt to turn power on or off during this stage.
5. Activate Additional Utilities,
Applications, & Drivers
Check to be sure that your LIFEBOOK is NOT
connected to a network or the Internet.
Caution
• Press [F5] while holding [Fn] until the Wireless Status Indicator
turns on in the Status Indicator Panel. This will allow you to
configure WLAN and Bluetooth. Check to be sure your LIFEBOOK
is NOT connected to the network or the Internet.
Ensure that the AC adapter is connected and supplying power
to your notebook before activating Click Me! It will take 25 to
30 minutes for Click Me! to install and configure your drivers
and utilities.
• In addition to an icon on the desktop, a dialog
box will automatically open that prompts you
to run Click Me!. If you choose not to run
Click Me! at this time, the Click Me! icon will
appear on your desktop. When you click the
Click Me! icon, your system will automatically
build the icon tray in the bottom right of the
screen. These icons provide links to utilities
that you will frequently access.
6. Connect to the Internet or Network
• Ensure the Wireless Status Indicator is "On", or—
• Connect an Ethernet cable (not supplied) to the LAN jack on
your notebook and to a wall jack or to Ethernet router.
• Register your LIFEBOOK with Fujitsu Service and Support
via our website (us.fujitsu.com/computers). This helps us
to better serve you.
for the first time
®
7, skip the step to setup
®
Windows Licensing Agreement and the
®
Additional
Applications
and Utilities)
"Click me!"
(for
3