Initial Start-Up - Fujitsu LIFEBOOK T901 Guide Rapide

Initial Start Up
Latch Button
Rotating Display
DC Power Jack
Connecting the LAN
LAN Jack
Power/Suspend/
Resume Switch
Wireless Device Switch
Display Latch
Display Panel
Top Latch Display Side
Bottom
Latch
Power/Suspend/
Resume Switch
AC Adapter
1. open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and that the
air vents are not blocked.
• Press the release latch and carefully lift the display, and adjust
until it is at a comfortable viewing angle.
To avoid possible damage to your computer, be sure
the display panel is perpendicular to the keyboard
before rotating it.
Caution
2. Convert from Notebook to Tablet
• Open your notebook and lift the display so it is perpendicular
to the keyboard.
• Rotate the display 180 degrees (either direction).
• Push the latch down toward the display.
• Carefully fold the display down onto the keyboard.
• Reverse this procedure to return to the notebook configuration.
Be sure to rotate the display in the opposite direction.
3. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
4. Connect to Internet or Network
• Move the Wireless Device switch to "On" ,or–
• Connect an Ethernet cable (not supplied) to the LAN jack
on your notebook and to a wall jack or to Ethernet router.
5. Turn on Power
• Slide the Suspend/Resume switch.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once successfully completed,
the operating system will begin the initialization process.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
6. Register
Starting Windows for the first time:
®
• Accept the Microsoft Windows
®
End User License Agreement to proceed. Select your User ID (optional)
and Password during the "Welcome Screen." Keep a record of your
User ID and password stored in a secure place. THE SCREEN WILL
GO DARK FOR SEVERAL MINUTES. Do not attempt to turn power
on or off during this stage.
• Register your LIFEBOOK with Fujitsu Service and Support via
our website (us.fujitsu.com/computers). This helps us to
better serve you.
7. Activate Additional Utilities & Drivers
It is critical that you run Click Me! to install necessary
applications, utilities and drivers.
To verify a successful installation, the application icons
will appear on the desktop. This process can take up
to 15-20 minutes.
• Check to be sure the LIFEBOOK is connected to the
Internet via the WLAN switch being on or connected
to a LAN.
• After the first boot, a dialog box will automatically open that prompts you
to run Click Me!. If you choose not run Click Me! at this time, the Click Me!
icon will remain on your desktop.
• When you click the Click Me! icon, your system will automatically build the
icon tray in the bottom right of the screen. Other utilities (e.g. Bluetooth)
and drivers may be installed. Icons will be created that provide links to
application/utilities that you will frequently access. Once Click Me! is
completed the system will reboot.
Licensing Agreement and the Fujitsu
®
(For
Additional
Applications
and Utilities)
"Click me!"
(For
Latest
Drivers)
(FDU)
3