Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Initial Start Up
opening the
Display
Connecting the AC Adaptor
DC Power Jack
Connecting the LAN
LAN Port
Wireless Device on/off Switch
1. open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and that the air vents
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect an Ethernet cable (not included) to the LAN jack on your notebook
4. Booting the System
Important:
• During the setup procedure, do not disconnect the power supply, press
• You should not attach any external devices and do not put a DVD/CD in
AC Adapter
Power Plug
• Press the Suspend/Resume/Power button (above the keyboard) to turn on
AC Cable
5. Register
• Accept the Microsoft
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
• DO NOT ATTEMPT TO TURN POWER ON OR OFF DURING THIS STAGE.
6. Registering Your LIFEBooK notebook
• Register your notebook with Fujitsu Service and Support via our website
• You will need to be set up with an Internet Service Provider (ISP)
7. Installing Click me!
• To verify a successful installation, the application icons will appear on the
• Check to be sure the WLAN switch is on or that your LIFEBOOK is
• After the first boot, a dialog box will automatically open that prompts you
Power/Suspend/
Resume Button
• When you click the Click Me! icon, your system will automatically build the
are not blocked.
and to a wall jack or to an Ethernet router.
any buttons, or use any peripheral devices such as a mouse, keyboard,
or remote control.
your drive until you have gone through the initial power on sequence.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
the notebook. When you do this for the first time, it will display a Fujitsu
logo on the screen. If you do nothing the system will load the operating
system, and then the Windows Welcome will begin.
Windows Licensing Agreement and the Fujitsu
®
End User License Agreement to proceed.
at us.fujitsu.com/computers.
to register online.
It is critical that you run Click Me! to
install necessary applications,
utilities and drivers.
desktop. This process can take up to 15-20 minutes.
otherwise connected to the Internet.
to run Click Me!. If you choose not run Click Me! at this time, the Click Me!
icon will remain on your desktop.
icon tray in the bottom right of the screen. Other utilities (e.g. Bluetooth)
and drivers may be installed. Icons will be created that provide links to
application/utilities that you will frequently access. Once Click Me! is
completed the system will reboot.
(For
Additional
Utilities)
"Click me!"
3
Publicité
Table des Matières
