Samsung DVE G 50A8800 Série Mode D'emploi page 46

Operations
Damp Alert
This function alerts you when shirts and other items that require ironing are dry enough to be suitable for
ironing.
1. Select a cycle and change the cycle settings as necessary.
This function is available for Normal, Heavy Duty, Bedding, Delicates, Perm Press, Towels and Denim
-
with Dryness set to 2-5.
2. Tap Options.
3. Turn the Navigation dial to select Damp Alert, and then tap OK.
4. Tap OK to select On or Off.
Alarm during drying:
1. Tap and hold to pause the cycle.
2. Open the door and take out the items you want to iron.
3. Close the door, and then tap and hold
AntiStatic
Reduces static electricity that occurs from clothing friction. This is done by spraying steam in a later
stage of the drying cycle. The AntiStatic function is only available with Normal, Heavy Duty, Perm Press,
Delicates, and Time Dry. In the Sensor Dry cycle, you can use this function if the dryness setting is 3 or
higher.
1. Tap Options.
2. Turn the Navigation dial to select AntiStatic, and then tap OK.
3. Tap OK to select On or Off.
Eco Dry
With the Eco Dry activated, drying takes a longer time but power consumption is reduced.
This function is available with Normal and Time Dry.
1. Tap Options.
2. Turn the Navigation dial to select Eco Dry, and then tap OK.
3. Tap OK to select On or Off.
NOTE
The drying time can be extended by up to 3 times normal depending on the temperature and load. The Eco
Dry function is enabled by default.
46 English
Untitled-2 46
to dry the remaining items.
2021-05-25 3:49:25