INFOSEC UPS SYSTEM E3 Performance 5000 RT Notice D'utilisation page 51

Fault mode When a fault occurs, the ERROR icon and
the fault code will be displayed.
3.7 Faults reference code (fixed Icon)
Fault event
Bus start fail
Bus over
Bus under
Inverter soft start
fail
Inverter voltage
high
Inverter voltage
Low
3.8 Warning indicators (icon flashes)
Warning
Low Battery
Overload
Battery is not connected
Over Charge
Site wiring fault
EPO enable
Over temperature
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 12 18 AA 59 205 19
Fault Icon Fault event
code
01 x Inverter output short
02 x Battery voltage too high
03 x Battery voltage too low
11 x Over temperature
12 x Over load
13 x Charger failure
Icon (flashing)
Fault
code
14
27
28
41
43
45
Code Alarm
Sounding every
2 seconds
Sounding every
second
Sounding every
2 seconds
Sounding every
2 seconds
Sounding every
2 seconds
Sounding every
2 seconds
Sounding every
2 seconds
Icon
x
x
51