INFOSEC UPS SYSTEM E3 Performance 5000 RT Notice D'utilisation page 43

Display
Backup time information
Configuration and fault information
Input, Battery & Output information
Load information
Programmable outlets information
Mode operation information
Battery information
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 12 18 AA 59 205 19
Function
Indicates the estimated backup time.
H: hours, M: minute.
Indicates the configuration items, and the configuration items are listed
in details in section 3-5.
Indicates the warning and fault codes, and the codes are listed in
details in section 3-7 and 3-8.
Indicate the input voltage, input frequency, battery voltage and output
voltage, output frequency.
V: voltage, Hz: frequency
Indicates the load level by 0-24%, 25-49%, 50-74% and 75-100%.
Indicates overload.
Indicates the load or the UPS output is short circuited.
Indicates that programmable management outlets are working.
Indicates the UPS powers the output directly from the mains
Indicates the battery is working.
Indicates charging status
Indicates the UPS is working in boost mode
Indicates the UPS is working in buck mode
Indicates the battery level by 0-24%, 25-49%, 50-74%, and 75-100%.
Indicates low battery.
43