Troubleshooting; Audio Problems - DigiSender Plug'n'Go LCD Série Mode D'emploi

DX2000-LCD - DigiSender® Plug'n'Go™ LCD - Single Input 5.8GHz Wireless AV Sender System

Troubleshooting

Audio Problems

Q: What seems
to be the problem
with the sound?
Please read the instructions carefully prior to installation
I can see the picture but can't
hear anything.
The sound is distorted.
There is a hissing sound and
the volume must be turned up
high on the second TV to hear
anything.
ENGLISH (UK)
1. Disconnect both the Trans-
mitter AND Receiver SCART
cables. Reconnect the cables
ensuring they are pushed into
the sockets firmly.
2. If you are using a home cin-
ema DVD player with surround
sound, please ensure the ana-
logue audio output on SCART
is switched on.
Turn down the volume on
your source device (Satellite,
Cable, Freeview, DVD or VCR).
1. Turn the output volume UP
(if possible) on your source
device (Satellite, Cable, Free-
view, DVD or VCR).
2. Ensure the Transmitter and
Receiver are within the usable
range (40m avg).
3. Switch off your microwave
oven if present.
Page 09