Cd Operation; Disc Handling Precautions; Inserting A Cd; Playing A Cd - Brandt MCB5000BT Manuel D'instructions

Disc handling precautions

Use only Digital Audio CDs with the
Never write on a CD or attach any sticker to the CD. Always
hold the CD at the edge and store it in its box after use with
the label facing up.
To remove dust and dirt, breathe on the CD and wipe it with a
soft, lint free cloth in a straight line from the centre towards
the edge.
Cleaning agents may damage the CD.
Do not expose the CD to rain, moisture, sand or to excessive
heat.

Inserting a CD

1.To open the CD compartment, press and release the PUSH button on the top of the unit.
2.Put the CD on the spindle, print side facing upwards until it clicks into place and then
gently close the CD compartment by pushing the PUSH button on the top of the unit.
To take out the CD, press and release the PUSH button on the top of the unit.
Note: The CD door should be opened ONLY when the CD is in stop mode.

Playing a CD

1 Select the CD mode. .
-Repeatedly press SOURCE until the CD mode is selected. You can also press CD.
-The player will scan the contents of the CD. The total number of tracks will then be
displayed. The player will automatically start playback from the first track.
2.To pause playback press
3.Repeatedly press or press&hold VOL+/VOL- to adjust the volume to the desired setting.
4.To stop playback, press AUTO/STOP.

CD OPERATION

symbol.
. To continue playback, press
Unit
EN-7
Remote control
again.
Remote control
Remote control