Erasing A Programme; Setting The Sleep Timer; Mute; Equaliser - Brandt MCB5000BT Manuel D'instructions

Erasing a programme

Press AUTO/STOP .
Remote control

Setting the sleep timer

The sleep timer is a countdown timer for switching the system to standby mode after a
specified time. The sleep timer can be set from 90 to 10 minutes in 10 minute steps.
Remote control
1 Press . SLEEP to set the sleep time (in minutes).
-"SL" and "S-90" will be shown on the display. The unit will now play for 90
minutes.
2 To decrease the sleep time in steps of 10 minutes, repeatedly press .
desired sleep time is shown.
-The remaining sleep time can be checked by pressing
3.To cancel the sleep timer, press
4.To switch the unit to the standby mode before the sleep time has elapsed, press
STANDBY .

Mute

Remote control
1.Press MUTE to turn off the sound.
- MUTE" will be shown on the display. "
2.Press MUTE again to restore the sound to the previous level.
- MUTE" will disappear from the display. "
-You can also adjust the volume level to restore the sound.

Equaliser

Remote control
The quality of the sound can be adjusted to suit the type of music playing by pressingEQ.
There are 5 settings to select from: FLAT, JAZZ, CLASSIC, ROC and POP.
Press EQ to cycle through the various equaliser settings until the desired sound setting
is selected.
CD OPERATION
SLEEP until "SL" disappears on the display.
EN-10
SLEEP
SLEEP .
until the