Connection; Turning Power On And Off; Bluetooth Operations - Brandt MCB5000BT Manuel D'instructions

1.Place the unit on a flat stable surface.
2.Connect the speakers to speaker output terminals of the unit with their
attached speaker cables (white for +, black for -).

TURNING POWER ON AND OFF

1.Plug the unit into the mains socket.
- The standby indicator light will illuminate.
2.Press STANDBY to turn on the power.
-"HELLO" will be shown on the display briefly.
- The standby indicator light will go out.
3.To turn the power off, press
- The standby indicator light will illuminate again.

BLUETOOTH OPERATIONS

By using the Bluetooth connection, you can listen to the sound from the Bluetooth audio
device from this unit wirelessly.
Pairing Bluetooth devices
-Turn on the Bluetooth function of the device and place the device near this unit.
-If this unit is already connected to a Bluetooth device, disconnect it.
1.Select the Bluetooth mode.
-Repeatedly press SOURCE until the Bluetooth
mode is selected.
-The display will show "bt".
2.Select "MCB5000BT" from the Bluetooth device's
Bluetooth menu.
3.Once pairing is successful, "bt" will disappear and
"CONNECt" will appear on the display.
4.Start play on the Bluetooth device.
- The effective operation range between the unit and the paired Bluetooth device is
approximately 10 metres in the open area.
- This unit can only be connected to one device at a time.
- To disconnect the Bluetooth device, from the Bluetooth devices screen press the device
to disconnect and tap Disconnect.

CONNECTION

STANDBY again.
EN-6
Remote control
Bluetooth