General Safety - Power Fist 8893547 Manuel D'utilisateur

the tank, or a fuel container, near an open flame or spark such as a water heater, space heater, clothes dryer or
furnace.
G. Never make adjustments or repairs with the engine running. Shut down the engine, disconnect the spark plug
wire, keeping it away from the spark plug to prevent accidental starting, wait 5 minutes before making adjustments
or repairs.
H. Never tamper with the engine's governor setting. The governor controls the maximum safe operation speed
and protects the engine. Over-speeding the engine is dangerous and will cause damage to the engine and to the
other moving parts of the machine. If required, see your authorized dealer for engine governor adjustments.
I. Keep combustible substances away from the engine when it is hot.
J. Never cover the machine while the muffler is still hot.
K. Do not operate the engine with the air cleaner or the carburetor air intake cover removed. Removal of such
parts could create a fire hazard. Do not use flammable solutions to clean the air filter.
L. The muffler and engine become very hot and can cause a severe burn; do not touch.

GENERAL SAFETY

WARNING
Operating this Wood Chipper safely is necessary to prevent or minimize the risk of death or serious injury. Unsafe
operation can create a number of hazards for you. Always take the following precautions when operating:
A. Your Wood Chipper is a powerful tool, not a plaything. Exercise extreme caution at all times. The machine is
designed to Chip Woods. Do not use it for any other purpose.
B. Know how to stop the Wood Chipper quickly.
C. Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to avoid slipping or falling.
D. See manufacturer's instructions for proper operation and installation of accessories.
E. Never use the machine without ensuring that all guards and shields are in place.
F. Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the Wood
Chipper. This includes all shields and guards. Modifications to your machine could cause personal injuries and
property damage and will invalid your warranty.
G. If the machine start to make an unusual noise or vibrate, shut down the engine, disconnect the spark plug
wire, keeping it away from the spark plug to prevent accidental starting, wait 5 minutes for engine to cool down,
then inspect for damage. Vibration is generally a warning of trouble. Check damaged parts and clean, repair and/or
replace as necessary.
H. Never tamper with safety devices. Check their proper operation regularly.
I. Before performing any maintenance or inspection procedure, shut down the engine, disconnect the spark
plug wire keeping it away from the spark plug to prevent accidental starting, wait 5 minutes for machine to cool
down.
J. Never allow people who are unfamiliar with these instructions to use the Wood Chipper. Allow only responsible
individuals who are familiar with these rules of safe operation to use your machine.
K. Never overload or attempt to chip woods beyond the manufacturer's recommendation. It could result in
personal injury or damage to the machine.
L. While using, don't hurry or take things for granted. When in doubt about the equipment or your surroundings
stop the machine and take time to look things over.
M. Never operate the machine when under the influence of alcohol, drugs, or medication.
N. Use the machine only in daylight.
O. Stay alert for hidden hazards or traffic.
P. Keep all nuts and bolts tight and keep the equipment in good operating condition.
Page 4 of 10