Configuration - SOMFY animeo IB+ 1 Mode D'emploi

EN
A
PICTURES
[1] 1 Output Converter WM 100-230 V AC,
wall mounted version
[2] 1 Output Converter PCB 100-230 V AC,
PCB version (with DIN rail clip, Ref. 9008049)
B
MOUNTING
[1] Choose the optimal location: flat and large surface
or electric cabinet. Close door!
[2] Use cable tie
[3] Mount the 1 Output Converter WM
[4] Mount the DIN rail version
1.
Vertical (wall mounted or PCB version)
2.
Horizontal (wall mounted version)
C
WIRING
[1] Keep the minimum distance
[2] Insulated screwdriver
[3] Wiring diagram
[4] Check the correct conversion of the incoming orders
UP:
C + s
STOP:
C + t+ s
DOWN:
C + t
[5] Possible switches
1.
Smoove Origin IB, Ref. 1811272
2.
Double push button
VERDRAHTUNG KABELING CABLE
Anschluss an ...
Forbindelse til ...
Connection to ...
Motors
Switches
IB+ bus
100 - 230 V AC
Leitung
Kabel
Cables
Min.: 4 x 0.75 mm /18 AWG
2
Max.: 4 x 2.5 mm /14 AWG
2
Min.: 3 x 0.6 mm/22 AWG
Max.: 3 x 2.5 mm /14 AWG
2
Min.: 3 x 0.6 mm/22 AWG
Max.: 3 x 1.5 mm /16 AWG
2
Min.: 3 x 1.5 mm /16 AWG
2
Max.: 3 x 2.5 mm /13 AWG
2
D

CONFIGURATION

[1] Reset button
With this button, you can test the configuration of
the 1 Output Converter or reset the setting of the
running time.
1.
Wall mounted version
2. PCB version
[2] Adjusting the output mode
The required output mode can be adjusted with the
sliding switch.
• IB Mode
• RK Mode
• 1:1 Mode
m The adjustment of the output mode must be
carried out in an ESD protected environment.
[3] Monitoring of the programmed output mode
The programmed mode is shown by the corre-
sponding LED.
• LED lights: running time is programmed
• LED flashes: no running time is programmed
[4] Reset of the programmed runnning time
Output Mode
*)
IB-Mode: Conversion from IB+ commands to
IB commands
RK-Mode: Conversion from IB+ commands to
RK commands
1:1-Mode (IB+ commands are not executed!):
One-to-one conversion from the input signal
at the output
 m No locking between UP and DOWN!
Input
C + t+ s
Verdrilltes Adernpaar
Parsnoet
Twisted pair
-
Recommended
Recommended
animeo IB+ 1 OUTPUT CONVERTER. REF. 5057401D -
*)
*)
= Output
C + t+ s
Max. Länge
Maks. l
ængde
Max. distance
150 m
150 m
1000 m
6/12