Lubrication; Machine Idle For A Long Time - I.G.F. Italstampi 4880 Série Mode D'emploi

I.G.F. Italstampi
PAGE: 20
WARNING: USE BUTTON "B" TO SHARPEN, AND BUTTON "A" TO DEBURR THE CUTTING
EDGE.
DURING THE SHARPENING PROCESS, KEEP TO THE ORIGINAL DRAWING OF THE BLADE BEVEL.
REPLACE THE BLADE WHEN THE CLEARANCE BETWEEN THE RING AND BLADE EXCEEDS 6 MMS.

6.2. LUBRICATION

Periodically lubricate the sliding elements with white vaseline oil.
For not damaging the slicer, NEVER USE SEED OIL OR OLIVE-OIL.
Lubricate all elements using the oilers as shown in ALL. 1, FIG. 17, FIG. 18.

6.3. MACHINE IDLE FOR A LONG TIME

Should the machine be idle for a long time, disconnect the wall main switch and clean the machine and its
accessories accurately.
Use white vaseline oil (or similar products) to protect all the machine elements. We advise covering the ma-
chine with a nylon (or similar) cloth.