General Warning; General Safety Warning; Tool Safety Warning - Alsafix D 90 G1 Manuel D'utilisation

General safety warning :

- User must wear eye protection which conforms to ANSI specification with front and side protec-
tion against flying object ; when handling, operating, and servicing the tool. It is employer's respon-
sibility to enforce user and all other nearby personnel at worksite to wear eye protection when ope-
rating the tool.
- It is recommended to wear ear protection near or at the job site to prevent hearing damage.
- Beware of the danger of entangled clothe and hair. Do not dress loose clothing and jewelry at
work. Keep you hair, clothing, and gloves away from moving part of the tool.
- Keep your finger AWAY from the trigger when the tool is not in use. This will prevent accidental
fire of the tool.
- This tool is not designed to be used in explosive atmosphere. The design of this tool will generate
spark and the exhaust will also cause possible danger to ignite highly flammable fuel or gas. Do
not use this tool in this kind of environment. Please also not smoke while using or handling the tool
and fuel cell.
- The fuel cell is high pressure liquefied gas bottle. Keep it away from spark , fire or high temp and
explosive environment. Do not puncture the bottle or attempt to open the fuel cell. When the fuel
used up, do not incinerate the bottle. Follow the recycle instruction on the bottle.
- Do not store the tool in temperature above 120°F (50°C). High temperature will result in explosion
or fire and the release of flammable gas. When not in use, keep the tool from high temperature
source or direct sun light.
- The tool needs to be used in well ventilated area. Do not inhale the exhaust or fume or the gas
because they are potentially dangerous tu human body.
- Keep body balance when operating the tool, do not over reach.
- Keep the tool, fuel, charger and battery out of the reach of children. The tool is dangerous in the
hand of untrained person.

Tool safety warning :

- Do not modify or repair the tool in any method other than the original design. The tool may func-
tion unexpectedly after the modification and cause dangerous.
- Never point the nozzle of the tool to anyone includes yourself. This tool is self-contained with
power source and will be dangerous if not use with care. Always assume the tool is loaded with nail
and fuel.
- Do not drive this tool over materials that is too hard or too soft. Hard material can ricochet nail and
hurt people, soft material may be penetrate easily and cause the nail to free fly.
- Please use only lubrification liquid specified in this manual to perform the lubrication. Use other
lubrication may cause damage to the tool and the risk of malfunction that will injure the operator.
- Please keep the tool in clean condition, wipe off grease or oil after grease or oil after work. Do not
use any solvent based cleaner to clean the tool. It is possible the solvent will deteriorate the rubber
or plastic components on the tool. Greasy handle and body will cause accidental drop the tool and
injury to nearby person.
- Please use fastener specified in this manual and on the tool. Use fastener that is not compatible
to the tool will cause jamming of the tool and injury to operator or nearby person.
- Do not use the tool to perform other job than designate function. Especially not use the tool as a
hammer, impact on the tool will increase the risk of cracked body and accidental discharge of fas-
tener.
- Remove the fuel cell and battery before performing maintenance, repair, cleaning and jam clera-
ning.
1. GENERAL WARNING
9