Freezer Leveling And Door Closing - Whirlpool WZF56R16DW Guide D'utilisation

Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
1.
Door Removal &
Replacement
Top Hinge
B
A. Top Hinge Cover
B. 5/16" Hex-Head Hinge Screws
C. Top Hinge
B
A. Hinge Pin
B. 3/8" Hex-Head Hinge Screws

Freezer Leveling and Door Closing

Style 1—without Grille
1. Locate the 2 front leveling legs taped among the packing
materials.
2. Screw these legs into the front holes on
the bottom of the freezer. The back of the
freezer rests on 2 fixed supports.
3. Adjust the front legs enough to lift the
cabinet up off the floor.
A
A. Cabinet Hinge Hole Plugs
A
B
C
A
A
A. Grommet
B. Handle
C. Setscrews
A
A. Hinge Pin
B. 3/8" Hex-Head Hinge Screws
WARNING
Electrical Shock Hazard
Door Swing Reversal and Handle Removal (optional)
2
1
B
C
3
B
4. Place a leveling tool on top of the freezer first side to side,
then front to back. Turn leg counterclockwise to raise a
corner. Turn leg clockwise to lower a corner.
5. Repeat Step 4 until freezer is level.
6. After freezer is fully loaded with food, recheck with level as in
Step 4.
7