Charging
The appliance will only charge when it is switched off.
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for trimming is 15 °C to
35 °C. Do not expose the appliance to temperatures higher than 50 °C for
extended periods of time.
• Connect the appliance via the special cord set (5) to an electrical outlet.
• A full charge takes approx. 10 hours and provides up to 40 minutes of
cordless operation time.
• The charging indicator (6) in the special cord set lights up continuously
when the appliance is being charged.
• Once the appliance is completely charged, discharge it through normal
use. Then recharge to full capacity.
Usage
Attach or exchange the attachments only when the appliance is switched
off. To turn the appliance on, slide the on/off switch (3) up.
Beard Trimming / Hair Clipping
Sliding combs (1a, 1b): Place one of the combs over the trimmer head (2a).
Press the release button (1c) and slide the comb to your desired length.
Fixed combs (1d, 1e): Click one of the combs onto the trimmer head (2a).
• Trim against hair growth by guiding the flat comb part over the skin.
• Do not force the appliance through the hair faster than it can be cut.
• Avoid clogging the comb with hair. Remove and clean it from time to time.
Precision and Contour Trimming
Use the trimmer head (2a) without comb attachment or the detailed trimmer
head (2c) for shaping sideburns, moustaches and partial short beards.
Ear/Nose Trimming
• Remove any head and click the ear & nose trimmer head (2b) onto the
handle of the appliance.
• Carefully guide the appliance to the hair to be trimmed so that they reach
into the cutting cage. Avoid introducing the trimmer more than 5 mm
(1/4˝) into nose or ear.
10