Functions And Meaning; Self-Locking System; Functional Principle; Profile Cylinder (Locking Cylinder) - effeff 809M Mode D'emploi

Pic. 5 :
1 Latch
2 Control latch
3 Bolt
Locking with the profile
cylinder is not possible
EN
44

Functions and meaning

Self-locking system

1
2
3

Profile cylinder (locking cylinder)

The lock is unlocked by the profile cylinder. For production versions with electronic monitoring of the
profile cylinder (Tab. 4), the profile cylinder is a signal transmitter for superordinate control systems
("Status messages for the control system", page 45). Locking with the profile cylinder is not necessary
and not possible. The profile cylinder has an internal stop collar so that it cannot be fully turned.
The key must be pulled out in normal operation.

Unlocking and locking

The locked security lock 809M can be unlocked in various ways depending on the function (with and
without escape door function).

Variant with escape door function (panic function E, transmission function):

The locked security lock 809M with escape door function is unlocked in the following situations:
· the door handle is operated from inside;
· the latch and bolt are retracted from outside with the actuation of the profile cylinder,
· by means of an electrical trigger action ("Access control", page
When the doors are closed, the bolts automatically extend.

Variant without escape door function (transmission function):

The locked security lock 809M without escape door function is unlocked in the following situations:
· the latch and bolt are retracted with the actuation of the profile cylinder,
· by means of an electrical trigger action ("Access control", page 45).
When the doors are closed, the bolts automatically extend.

Escape door function

In general: A door with escape door lock can always be opened with the door handle from the inside, even
if it is locked.
The electric security lock 809M locks automatically. If it is a door lock with
automatic locking, the close door is always locked.

Functional principle

When closing the door the extended latch (Pic. 5 – 1) is pushed on the
striking plate. If the latch is activated, then the control latch can also be
activated (– 2). If the door is completely closed the latch slides into the
latch opening in the striking plate and is extended again such that the
control latch remains pressed in.
If the latch and the control latch are simultaneously pressed in, the lock (–
3) is released and extended by a spring mechanism. This mechanism
prevents the deadbolt from extending when the door is opened during
normal use.
45).
Functions and meaning