Labels; Maintenance - Makita HW120 Mode D'emploi

12.
OUT
WARNING!
1. 2. Lance delivery
Outlet of high
pressure exhaust
gases.
CHEM
5. Detergent tank 6. Fuel tan
WARNING!
Make sure that the stickers/labels are present on the machine and that they are
readable; if they are missing or erased, please attach or replace them. Request them
from Makita Service Centers.
EN

Labels

1 bar min
3. Water feeding
7. Total stop machine
WARNING!
4.
Do not direct the
high pressure jet
towards people,
8. Detergent adjustment
animals or objects.
13.

Maintenance

All fixing and maintenance must be carried out by authorised
personnel.
All maintenance operations must be carried out keeping the
y
machine on an even floor. The machine must be disconnected
from the main power and from the water supply.
A correct use and maintenance are necessary to guarantee the
y
machine's reliability and it's best performances.
In order to ensure regular and constant performances it is
y
recommended to use original spare parts only.
The machine you have bought has undergone a factory test
y
which ensures correct running at standard conditions.
Besides preliminary controls, the machine needs constant checks
that are to be carried out according to following time schedules:
EVERY 2 WEEKS OR 50 HOURS OF WORK
Clean the water filter placed in the water inlet by means of an air
jet (Fig. 5).
Fig. 5
9