National Instruments NI USB-9162 Mode D'emploi page 7

Step 6. Run Test Panels
Use the MAX test panel as follows:
1. In MAX, expand Devices and Interfaces»NI-DAQmx Devices.
2. Right-click the device, and select Test Panels to open a test panel.
3. Click Start to test device functions, or Help for operating instructions.
To troubleshoot errors, refer to the NI-DAQmx Help, or go to .
ni.com/support
Step 7. Using Your NI USB Device in an Application
Use the DAQ Assistant to configure virtual and measurement channels.
After installing NI-DAQmx refer to the Start»All Programs»National
Instruments»NI-DAQ for LabVIEW SignalExpress and for the NI-DAQmx
readme for operating system and NI application version support.
NI-DAQmx for USB Devices Getting Started Guide 6 ni.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com