National Instruments NI USB-9162 Mode D'emploi page 3

Step 3. Unpack and Set Up the NI USB Device
Remove the packaging and inspect the device. Contact NI if the device is
damaged. Do not install a damaged device.
The NI USB device is static sensitive. Always properly ground
Caution
yourself and the equipment when handling or connecting the device.
For signal label, strain relief, panel mounting, and safety and compliance
information, refer to the NI USB device documentation available at
.
manuals
To install the NI USB device, plug the USB cable into the PC and device, and
follow the prompts.
1
3
1 Screw Terminal Block
(interchangeable before signal connection)
2 Signal Labels
NI-DAQmx for USB Devices Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2
4
3 USB-600x/621x/6501 Device
4 USB-9000 Series Device
5 USB-443x Device
2
ni.com/
5
ni.com