National Instruments NI USB-9162 Mode D'emploi page 2

GETTING STARTED GUIDE
™
NI-DAQ mx for USB Devices
This guide describes how to install and configure NI USB data acquisition (DAQ)
devices and how to verify that the devices are working properly. Current versions
of NI documents are available at . For NI-DAQmx related
ni.com/manuals
documentation, go to and enter . The NI-DAQmx readme,
ni.com/info rddq8x
available on the NI-DAQmx installation disc, contains software version support
information.
You must be an Administrator to install NI software and devices on your computer.
Linux and Mac OS drivers are available by entering at .
rddqld ni.com/info
Step 1. Install the NI Application Software
Install the NI application software such as NI LabVIEW. Back up any applications
before upgrading software or modifying the application.
Step 2. Install NI-DAQmx
Install NI-DAQmx driver software before installing NI USB devices so Windows
can detect them. Insert the disc included with your device into your computer.
If the NI-DAQmx installer does not open automatically, select Start»Run.
Enter , where is the drive letter. Complete the instructions.
x :\autorun.exe x
Troubleshooting information is available at .
ni.com/support/daqmx
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com