National Instruments NI USB-9162 Mode D'emploi page 6

3. Right-click the NI USB device name and select Self-Test. When the self-test
completes, a successful verification message appears. If an error occurs, refer
to
ni.com/support/install
Step 5. Attach Sensors and Signal Lines
All NI USB devices have a PDF user manual that contains pinouts. Go to
and search for your device. The following table lists pinout locations.
manuals
Location
MAX
DAQ Assistant
NI-DAQmx Help
ni.com/manuals
For information about sensors, go to
IEEE 1451.4 TEDS smart sensors, go to
If using LabVIEW SignalExpress, go to
Application.
© National Instruments Corporation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
.
How to Access Pinout
Right-click the device name under NI-DAQmx Devices, and
select Device Pinouts.
Right-click the device name under NI-DAQmx Devices, and
select Help»Online Device Documentation. A browser
window opens to
ni.com/manuals
search for relevant device documents.
Select the task or virtual channel, and click the Connection
Diagram tab. Select each virtual channel in the task.
Select Start»All Programs»National Instruments»
NI-DAQmx»NI-DAQmx Help.
Refer to the device documentation.
ni.com/sensors
ni.com/teds
Step 7. Using Your NI USB Device in an
5 NI-DAQmx for USB Devices Getting Started Guide
ni.com/
with the results of a
. For information about
.