National Instruments NI USB-9162 Mode D'emploi page 5

• Configure and Test This Device—Opens MAX.
• Take No Action—Recognizes your device but does not launch an application.
The following features are available by right-clicking the NI Device Monitor icon:
• Run at Startup—Runs NI Device Monitor at system startup (default).
• Clear All Device Associations—Select to clear all actions set by the Always
Take This Action checkbox in the device auto-launch dialog box.
• Close—Turns off NI Device Monitor.
Step 4. Confirm NI USB Device Recognition
To confirm NI USB device recognition, complete the following steps:
1. Launch MAX.
2. Expand Devices and Interfaces to confirm MAX detects your NI USB
device. If your NI USB device is not listed, press <F5> to refresh MAX. If the
device is still not recognized, go to
NI-DAQmx for USB Devices Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
.
ni.com/support/daqmx
4 ni.com