Makita SKR60 Mode D'emploi page 11

Remote control
The optional remote control stops, starts, or changes
direction of laser rotation and controls scanning.
Rotation left /
Move scan left
Increase rotation
speed or scan
length
Decrease rotation
speed or scan
length
Care and Handling
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
The Manual Laser is a precision instrument
which must be handled with care. Avoid shock
and vibrations. Always store and transport the laser
and its accessories in the carrying case.
Although weather resistant, you must always keep
your laser and its accessories dry and clean after
using. This will increase the battery life.
Do not store your laser at temperatures below –4°F
(-20°C) or above 176°F (80°C) because the
electronic components could be damaged.
Do not store your instrument in its case if the
instrument or the case are wet to prevent water
condensation inside the instrument.
Rotation right /
Move scan right
Rotation/Scanning
Toggle Key
Battery
11