Understanding The Status Indicators - Whirlpool 980 Série Guide D'utilisation Et D'entretien

SETTING THE CONTROLS

Understanding the status indicators

Washing
The Washing indicator glows at the start of
WASHING
Add-A-Dish
The Add-A-Dish indicator glows as soon as
the dishwasher starts and
ADD-
keeps glowing until the main
A-DISH
wash portion of the cycle
begins. You can add an
additional item while the indicator is on.
Water Heating
The Water Heating indicator glows when-
WATER WATER
HEATING
Rinsing
The Rinsing indicator glows during the last
RINSING
18
the first fill of any cycle
(except Rinse Only) and
remains on until the end
of the main wash.
ever water is heated
during a cycle.
two rinses of all cycles.
Drying
The Drying indicator glows during the
drying portion of each
DRYING
cycle – even if you select
Air Dry. It turns off at
the end of the cycle. If
dishes are not as dry as you expected when
using Air Dry, either allow longer drying
times (overnight) or do not use Air Dry.
Clean
The Clean indicator glows at the end of a
cycle to show that the
load is clean. All other
CLEAN
indicators turn off. The
Clean indicator glows until
you open the door or press Cancel/Drain or
any other control pad.
Controls Locked
The Controls Locked feature lets you lock
the control pads. When
CONTROLS CONTROLS
the controls are locked,
LOCKED
you cannot start the
dishwasher.
To lock controls:
• Press and hold Air Dry (about 5
seconds) until the Controls Locked
indicator glows.
AIR DRY AIR DRY
To unlock controls:
• Press and hold Air Dry (about 5 seconds)
until the Controls Locked indicator turns
off.