Fein ALG 20 Mode D'emploi page 12

3 41 01 030 06 2.book Seite 12 Freitag, 23. Mai 2003 10:04 10
EN
The charging time for the FEIN battery
charger ALG 20 lies between 20 to
60 minutes, depending on the capacity of
the battery.
If the battery becomes discharged within a
short time despite it having been charged
correctly, it has reached the end of its
service life.
Adapter (3).
The adapter serves for charging FEIN bat-
teries using the battery interface "Indus-
try" (d).
Key to the LED display (1).
LED display
Red
Red
Red flashing
Red + green flashing
Green
12
The battery interface "Industry" (d) is
used for batteries of the following devices:
- ASW 12
- A T
CCU EC
- ABS 9,6-2 EU
- ABS 12-2 EU
- ASB 12-2 EU
- DSske
- DSse
- MSx 315
Push the adapter (3) onto the charging
interface (2) from above until it
notches.
To pull of the adapter (3) pull the lock-
ing lever and pull the adapter off
upwards.
Condition
Without the battery pushed on:
Ready for use.
With the battery pushed on:
Battery is faulty,
Contact cut-out.
The upper or lower temperature limit of the
battery has been exceeded; the temperature
sensor is faulty or the battery is discharged.
Fast-charging is not possible.
Only the conservation-charging is active.
Fast-charging is active.
Fast-charging completed
(battery is fully charged).
The conservation-charging is active.
ALG 20