Care & Cleaning - Breville the Control Grip BSB510XL Mode D'emploi

Care & Cleaning
MOTOR BODY
Remove the power plug from power outlet
before cleaning. To remove any food residue,
wipe the motor body and cord with a damp
cloth only. Do not use abrasive cleaners or steel
wool. Never immerse the motor body in water
or any other liquid. Do not place motor body in
dishwasher.
BLENDING SHAFT
Remove the power plug from power outlet
before cleaning. Remove the motor body from
the blending shaft. The blending shaft can be
hand washed in hot soapy water, rinsed and
dried thoroughly after each use. Alternatively,
the blending shaft can also be washed in the
dishwasher. Do not use abrasive cleaners or
steel wool.
QUICK WASH: Between each processing
task, with the motor body attached, place the
blending shaft and blending blade only into a
jug of water and press the trigger switch to turn
on for 5 seconds. This will remove any food on
the blending blade and allow you to continue
onto the next processing task.
CHOPPING BOWL, CHOPPING
BOWL LID, CHOPPING BLADE AND
STORAGE LID/ANTI-SLIP MAT
Remove the power plug from power outlet
before cleaning. Remove the motor body from
the chopping bowl lid, and then remove the
chopping bowl lid and chopping blade from
the chopping bowl.
The chopping bowl, chopping bowl lid and
chopping blade should be hand washed in
hot soapy water, rinsed and dried thoroughly
after each use. Alternatively, the chopping
bowl and chopping blade can be washed in the
dishwasher. Do not wash the chopping bowl lid
in the dishwasher. Do not use abrasive cleaners
or steel wool.
14
BSB510XL_IB_B16.indd 14
WHISK
Remove the power plug from power outlet
before cleaning. Remove the motor body from
whisk. The whisk can be hand washed in hot
soapy water, rinsed and dried thoroughly after
each use. Alternatively, the whisk can also be
washed in the dishwasher. Do not use abrasive
cleaners or steel wool.
Remove the whisk from the whisk gearbox
before placing in the dishwasher.
NOTE
The whisk gearbox is not dishwasher safe.
whisk gearbox
BLENDING JUG AND STORAGE LID/
ANTI-SLIP MAT
The blending jug and storage lid/anti-slip
mat can be hand washed in hot soapy water,
rinsed and dried thoroughly after each use.
Alternatively, the blending jug and storage
lid/anti-slip mat can also be washed in the
dishwasher. Do not use abrasive cleaners or
steel wool.
STORAGE
Remove the power plug from power outlet
before storing. Ensure the appliance is clean
and completely dry.
Insert the chopping blade into the chopping
bowl then attach the chopping bowl lid. Place
the assembled chopping bowl inside the
blending jug. Attach the storage lid/anti-slip
mat to the bottom of the blending jug.
7/11/2016 1:33 PM