Philips AVENT SCF396/11 Mode D'emploi page 9

Step 1: Disassembling
Make sure that you remove the white valve from the breast pump.
Step 2: Cleaning
The parts that come in contact with milk can be cleaned manually or in the dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast
pump parts as this may cause damage.
Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this
causes permanent damage to these parts.
Caution: Be careful when you remove and clean the white valve. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at
the ribbed tab on the side of the valve. To clean the white valve, rub it gently between
your fingers in warm water with some dishwashing liquid. Do not insert objects into the
white valve, as this may cause damage.
Step 2A: Manual cleaning
Supplies needed:
- Mild dishwashing liquid
- Drinking-quality water
- Soft, clean brush
1. Rinse all parts under a
running tap with
lukewarm water.
5 min.
2. Soak all parts for 5
minutes in warm water
with some mild
dishwashing liquid.
- Clean tea towel or drying rack
- Clean sink or bowl
3. Clean all parts with a
cleaning brush.
English
4. Thoroughly rinse all
parts under a running tap
with drinking-quality
water.
11