Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Please read the instructions carefully before installing and using.
WARNING
1
3A
Press the inserts into the toilet bowl holes. Align the base
plate to the slotted area of the template and then place the
hardware onto the base plate as shown. Using a medium
size Phillips screwdriver, start screwing down the bolts into
the inserts until the base plate if fixed.
If the insert does not fit the bowl, proceed to Step 3B,
otherwise, skip Step 3B
and continue with Step 4.
4
Remove the template from the bowl.
The product requires a exible supply hose.
The water shutoff valve should be near the installed product for ease of installation.
Do not use in hot water line. Temperature above 40°C(104°F) will damage the product and void your warranty.
Remove old toilet seat.
BOLT
BASE
PLATE
2
Wipe the bowl surface clean. Lay the template over the
top of the toilet bowl. Position the template to how you
want the bidet seat to pair up with the bowl once installed.
3B
Place the base plate in the slotted area of the template
and then place the hardware onto the base plate as
shown. Screw in the nuts from the underside of the
ceramic until the base plate is fixed.
5
Slide the bidet seat across the base plate until you hear
a click. The toilet seat is now assembled to the bowl.
- 3 -
BOLT
BASE
PLATE
NUT
760217-100
Publicité
Table des Matières
