Chauvet DJ SlimPAR T12BT Guide De Référence Rapide page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
EN
What is Included
SlimPAR T12BT
Power cord
Quick Reference Guide
To Begin
Unpack your SlimPAR T12BT and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of SlimPAR T12BT products that you can power link at each voltage, see the User Manual or
the specification sticker on the product.
Fuse Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5.
Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
(such as CLP-15 from Chauvet)
2
QUICK REFERENCE GUIDE
Safety
Notes.
Mounting clamp
Mounting bracket
Safety cable
(such as CH-05 from
Chauvet)
SlimPAR T12BT QRG Rev. 8

Publicité

Table des Matières
loading

Table des Matières